O artykule
Data publikacji: 17 mar 2025
Otrzymano: 04 paź 2024
Przyjęty: 31 sty 2025
DOI: https://doi.org/10.2478/amns-2025-0838
Słowa kluczowe
© 2025 Chao Xie, published by Sciendo
This work is licensed under the Creative Commons Attribution 4.0 International License.
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Water parameters
| Density/(kg/m3) | Surface tension/(N/m) | Viscosity/(Pa·s) |
|---|---|---|
| 998.2 | 0.0719404 | 0.00298 |
Computational mesh parameters
| Mesh | Mesh quantity/10,000 | Mesh orthogonal quality |
|---|---|---|
| (a) Conventional medical injection pump nozzle | 2 | 0.78 |
| (b) Small inclination angle injection pump nozzle | 2.3 | 0.8 |
| (c) Three-stage nozzle structure | 3 | 0.76 |
Boundary conditions of the nozzle model
| Inlet velocity/(m/s) | Turbulence intensity/% | Turbulent viscosity ratio | Initial total pressure/MPa | Contact angle/(°) | Inlet water volume fraction/% |
|---|---|---|---|---|---|
| 0.3mm/s | 2 | 10 | 20 | 70 | 100 |
Comparison of nozzle injection efficiency
| Nozzle type | Nozzle outlet velocity (m/s) | Injection efficiency improvement |
|---|---|---|
| (a) Conventional nozzle | 0.12 | |
| (b) Small flow inclination angle injection pump nozzle | 0.14 | 16.67% |
| (c) Three-stage nozzle structure | 0.18 | 50.00% |