Ultrasonic wave promoting ice melt in ice storage tank based on polynomial fitting calculation model
, , , , e
22 nov 2021
INFORMAZIONI SU QUESTO ARTICOLO
Pubblicato online: 22 nov 2021
Pagine: 447 - 456
Ricevuto: 06 giu 2021
Accettato: 24 set 2021
DOI: https://doi.org/10.2478/amns.2021.1.00103
Parole chiave
© 2021 Chengjun Li et al., published by Sciendo
This work is licensed under the Creative Commons Attribution 4.0 International License.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Ice-melting curve fitting R2 value table
| The ice-water ratio is 0.2, the initial ice amount is 2.3 kg, and the size is large | Water power 0 w/kg | 0.9825 | 0.9707 | 0.9732 | 0.998 | 0.9998 |
| Water power 16 w/kg | 0.9724 | 0.9804 | 0.9829 | 0.9982 | 0.9998 | |
| Water power 28 w/kg | 0.9695 | 0.976 | 0.9855 | 0.9981 | 0.9998 | |
| Water power 40 w/kg | 0.9752 | 0.982 | 0.9915 | 0.9998 | 1 | |
| Power 16 W/kg water, initial ice volume 2.3 kg, large size | Ice water ratio of 0.04 | 0.9698 | 0.8382 | 0.9507 | 1 | 1 |
| Ice water ratio of 0.06 | 0.9772 | 0.7987 | 0.8776 | 0.9742 | 0.9971 | |
| Ice water ratio of 0.1 | 0.9845 | 0.8755 | 0.9198 | 0.9848 | 0.9991 | |
| Ice water ratio of 0.2 | 0.9724 | 0.9804 | 0.9829 | 0.9982 | 0.9998 | |
| The ice-water ratio was 0.2, and the initial ice volume was 2.3 kg | Power 16 W/kg water + large size | 0.9734 | 0.9804 | 0.9829 | 0.9982 | 0.9998 |
| Power 16 W/kg water + small size | 0.9792 | 0.9646 | 0.9776 | 0.9985 | 0.9999 | |
| Power 40 W/kg water + large size | 0.9752 40 | 0.982 | 0.9915 | 0.9998 | 1 | |
| Power W/kg water + small size | 0.9735 40 | 0.9504 | 0.9782 | 0.9981 | 1 | |