Experimental analysis of the effect of ultrasonic vibration on porosity suppression in narrow gap laser welding

[1] Sun, J., Nie, P., Feng, K., Li, Z., Guo, B., & Jiang, E. (2017). The elimination of pores in laser welds of AISI 304 plate using different shielding gases. Journal of Materials Processing Technology, 248, 56-63. Search in Google Scholar

[2] Zhang, Y., Chen, G., Zhou, C., Jiang, Y., Zhong, P., & Li, S. (2017). Pores formation in laser-MAG welding of 42CrMo steel. Journal of materials processing technology, 245, 309-317. Search in Google Scholar

[3] Fetzer, F., Sommer, M., Weber, R., Weberpals, J. P., & Graf, T. (2018). Reduction of pores by means of laser beam oscillation during remote welding of AlMgSi. Optics and Lasers in Engineering, 108, 68-77. Search in Google Scholar

[4] Bandi, B., Dinda, S. K., Kar, J., Roy, G. G., & Srirangam, P. (2018). Effect of weld parameters on porosity formation in electron beam welded Zircaloy-4 joints: X-ray tomography study. Vacuum, 158, 172-179. Search in Google Scholar

[5] Hao, K., & Gao, M. (2021). Effect of beam oscillating behavior on pore inhibition and microstructure evolution mechanisms of laser welded Q235 steel. Journal of Materials Research and Technology, 11, 1816-1827. Search in Google Scholar

[6] Liu, H., Yang, S., Xie, C., Zhang, Q., & Cao, Y. (2017). Microstructure characterization and mechanism of fatigue crack initiation near pores for 6005A CMT welded joint. Materials Science and Engineering: A, 707, 22-29. Search in Google Scholar

[7] Zhou, S., Ma, G., Dongjiang, W., Chai, D., & Lei, M. (2018). Ultrasonic vibration assisted laser welding of nickel-based alloy and Austenite stainless steel. Journal of Manufacturing Processes, 31, 759-767. Search in Google Scholar

[8] Luna, L. E. R., Bracarense, A. Q., Pessoa, E. C. P., Costa, P. S., Guerrero, G. A., & Reyes, A. E. S. (2021). Effect of the welding angle on the porosity of underwater wet welds performed in overhead position at different simulated depths. Journal of Materials Processing Technology, 294, 117114. Search in Google Scholar

[9] Liu, J., Zhu, H., Li, Z., Cui, W., & Shi, Y. (2019). Effect of ultrasonic power on porosity, microstructure, mechanical properties of the aluminum alloy joint by ultrasonic assisted laser-MIG hybrid welding. Optics & Laser Technology, 119, 105619. Search in Google Scholar

[10] Jiang, M., Chen, X., Chen, Y., & Tao, W. (2020). Mitigation of porosity defects in fiber laser welding under low vacuum. Journal of Materials Processing Technology, 276, 116385. Search in Google Scholar

[11] Lei, Z., Bi, J., Li, P., Li, Q., Chen, Y., & Zhang, D. (2018). Melt flow and grain refining in ultrasonic vibration assisted laser welding process of AZ31B magnesium alloy. Optics & Laser Technology, 108, 409-417. Search in Google Scholar

[12] Zhang, L., Mostavi, A., Ozevin, D., & Indacochea, J. E. (2019). The measurement of weld morphology and inclusions using ultrasonics. Measurement, 144, 33-43. Search in Google Scholar

[13] Kolubaev, A. V., Sizova, O. V., Fortuna, S. V., Vorontsov, A. V., Ivanov, A. N., & Kolubaev, E. A. (2020). Weld structure of low-carbon structural steel formed by ultrasonic-assisted laser welding. Journal of Constructional Steel Research, 172, 106190. Search in Google Scholar

[14] Xu, J., Rong, Y., Huang, Y., Wang, P., & Wang, C. (2018). Keyhole-induced porosity formation during laser welding. Journal of Materials Processing Technology, 252, 720-727. Search in Google Scholar

[15] Zhou, S., Wang, B., Wu, D., Ma, G., Yang, G., & Wei, W. (2021). Follow-up ultrasonic vibration assisted laser welding dissimilar metals for nuclear reactor pump can end sealing. Nuclear Materials and Energy, 27, 100975. Search in Google Scholar

[16] Ardika, R. D., Triyono, T., & Muhayat, N. (2021). A review porosity in aluminum welding. Procedia Structural Integrity, 33, 171-180. Search in Google Scholar

[17] Volpp, J. (2018). Formation mechanisms of pores and spatters during laser deep penetration welding. Journal of Laser Applications, 30(1). Search in Google Scholar

[18] Chen, Q., Ge, H., Yang, C., Lin, S., & Fan, C. (2017). Study on pores in ultrasonic-assisted TIG weld of aluminum alloy. Metals, 7(2), 53. Search in Google Scholar

[19] Nomura, K., Otaki, S., Kita, R., & Asai, S. (2019, September). In-situ detection of weld defect during the welding process by laser ultrasonic technique. In Proceedings of Meetings on Acoustics (Vol. 38, No. 1). AIP Publishing. Search in Google Scholar

[20] Li, Y., Shuai, J., & Xu, K. (2018). Investigation on size tolerance of pore defect of girth weld pipe. PloS one, 13(1), e0191575. Search in Google Scholar

[21] Yan, S., Zhu, Z., Ma, C., Qin, Q. H., Chen, H., & Fu, Y. N. (2019). Porosity formation and its effect on the properties of hybrid laser welded Al alloy joints. The International Journal of Advanced Manufacturing Technology, 104, 2645-2656. Search in Google Scholar

[22] Liu, F., Zhang, H., Liu, H., Chen, Y., Muhammad Kashif, K., Wang, Q., & Liu, Y. (2019). Influence of welded pores on very long-life fatigue failure of the electron beam welding joint of TC17 titanium alloy. Materials, 12(11), 1825. Search in Google Scholar

[23] Tarasov, S. Y., Vorontsov, A. V., Fortuna, S. V., Rubtsov, V. E., Krasnoveikin, V. A., & Kolubaev, E. A. (2019). Ultrasonic-assisted laser welding on AISI 321 stainless steel. Welding in the World, 63, 875-886. Search in Google Scholar

[24] Teyeb, A., Silva, J., Kanfoud, J., Carr, P., Gan, T. H., & Balachandran, W. (2022). Improvements in the microstructure and mechanical properties of aluminium alloys using ultrasonic-assisted laser welding. Metals, 12(6), 1041. Search in Google Scholar

[25] Zhan, Y., Zhang, E., Ge, Y., & Liu, C. (2018). Residual stress in laser welding of TC4 titanium alloy based on ultrasonic laser technology. Applied Sciences, 8(10), 1997. Search in Google Scholar

[26] Gorunov, A. I., Nyukhlaev, O. A., & Gilmutdinov, A. K. (2018). Investigation of microstructure and properties of low-carbon steel during ultrasonic-assisted laser welding and cladding. The International Journal of Advanced Manufacturing Technology, 99, 2467-2479. Search in Google Scholar

[27] Korycki, A., Garnier, C., Bonmatin, M., Laurent, E., & Chabert, F. (2022). Assembling of carbon fibre/PEEK composites: Comparison of ultrasonic, induction, and transmission laser welding. Materials, 15(18), 6365. Search in Google Scholar

[28] Chen, X., Fu, J., Zhao, Y., Jiang, Y., Yan, K., Jiang, C., & Chen, J. (2021). Melting behavior in ultrasonic-assisted narrow-gap laser welding with filler wire. Journal of Laser Applications, 33(1). Search in Google Scholar