Accès libre

Modelling and Simulation Analysis of High-Pressure Common Rail and Electronic Controlled Injection System for Diesel Engine

Guojin Chen

Guojin Chen

School of Mechanical Engineering, Hangzhou Dianzi UniversityHangzhou, China
Recherchez cet auteur sur
Sciendo|Google Scholar
Chen, Guojin
, 
Chang Chen

Chang Chen

School of Mechanical Engineering, Hangzhou Dianzi UniversityHangzhou, China
Recherchez cet auteur sur
Sciendo|Google Scholar
Chen, Chang
, 
Yiming Yuan

Yiming Yuan

School of Mechanical Engineering, Hangzhou Dianzi UniversityHangzhou, China
Recherchez cet auteur sur
Sciendo|Google Scholar
Yuan, Yiming
 et 
Lingjun Zhu

Lingjun Zhu

School of Mechanical Engineering, Hangzhou Dianzi UniversityHangzhou, China
Recherchez cet auteur sur
Sciendo|Google Scholar
Zhu, Lingjun
  
05 nov. 2020
Modelling and Simulation Analysis of High-Pressure Common Rail and Electronic Controlled Injection System for Diesel Engine's Cover Image
À propos de cet article
Article précédent
Article suivant
Citez
Télécharger la couverture
Publié en ligne: 05 nov. 2020
Pages: 345 - 356
Reçu: 10 juil. 2020
Accepté: 14 août 2020
DOI: https://doi.org/10.2478/amns.2020.2.00043
Mots clés
© 2020 Guojin Chen et al., published by Sciendo
This work is licensed under the Creative Commons Attribution 4.0 International License.

Fig. 1

Electronic fuel injection system.
Electronic fuel injection system.

Fig. 2

Structure of high-pressure oil pump.
Structure of high-pressure oil pump.

Fig. 3

High-pressure common rail pipe.
High-pressure common rail pipe.

Fig. 4

Solenoid-controlled injector.
Solenoid-controlled injector.

Fig. 5

A simplified model of the fuel injection system.
A simplified model of the fuel injection system.

Fig. 6

Hydsim simulation model of the fuel injection system.
Hydsim simulation model of the fuel injection system.

Fig. 7

The relationship between the area of the oil inlet orifice and the fuel pressure in the control chamber.
The relationship between the area of the oil inlet orifice and the fuel pressure in the control chamber.

Fig. 8

The relationship between the area of oil inlet orifice and the lift of the needle valve.
The relationship between the area of oil inlet orifice and the lift of the needle valve.

Fig. 9

The relationship between the area of the oil inlet orifice and the injection rate.
The relationship between the area of the oil inlet orifice and the injection rate.

Fig. 10

The relationship between the area of the oil outlet orifice and the fuel pressure in the control chamber.
The relationship between the area of the oil outlet orifice and the fuel pressure in the control chamber.

Fig. 11

The relationship between the area of oil outlet orifice and the lift of the needle valve.
The relationship between the area of oil outlet orifice and the lift of the needle valve.

Fig. 12

The relationship between the area of the oil outlet orifice and the injection rate.
The relationship between the area of the oil outlet orifice and the injection rate.

Fig. 13

The relationship between the diameter of the control piston and the lift of the needle valve.
The relationship between the diameter of the control piston and the lift of the needle valve.

Fig. 14

The relationship between the diameter of the control piston and the injection rate.
The relationship between the diameter of the control piston and the injection rate.

Fig. 15

Comparison of simulation value, test value and the standard value of fuel injection rate.
Comparison of simulation value, test value and the standard value of fuel injection rate.

Fig. 16

Comparison of simulation value, test value and the standard value of fuel injection quantity.
Comparison of simulation value, test value and the standard value of fuel injection quantity.
Langue:
Anglais
Périodicité:
1 fois par an
Sujets de la revue:
Sciences de la vie, Sciences de la vie, autres, Mathématiques, Mathématiques appliquées, Mathématiques générales, Physique, Physique, autres
RSS Feed de la revue