Research on TMD collision damping based on two-way dense ribbed cavity building cover
21 mars 2025
À propos de cet article
Publié en ligne: 21 mars 2025
Reçu: 01 nov. 2024
Accepté: 09 févr. 2025
DOI: https://doi.org/10.2478/amns-2025-0652
Mots clés
© 2025 Jianyong Chen, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Figure 1.

Figure 2.

Figure 3.

Figure 4.

Figure 5.

Figure 6.

The section of the hollow wall (kN·m)
Hollow rate (%) | Square mold | Cylindrical core mold | ||||||
---|---|---|---|---|---|---|---|---|
DNS | ASM | DNS | ASM | |||||
M1 | M2 | M1 | M2 | M1 | M2 | M1 | M2 | |
20 | 36.85 | 160.65 | 38.15 | 166.67 | 36.94 | 154.12 | 40.61 | 173.02 |
25 | 37.32 | 160.32 | 38.33 | 167.74 | 36.35 | 146.59 | 40.78 | 173.57 |
30 | 37.37 | 158.41 | 38.42 | 168.45 | 37.66 | 157.42 | 40.87 | 173.88 |
35 | 37.78 | 158.13 | 38.57 | 168.62 | 37.94 | 158.06 | 40.92 | 173.54 |
40 | 37.95 | 158.62 | 38.74 | 168.59 | 38.31 | 156.83 | 40.85 | 172.72 |
45 | 38.09 | 158.34 | 38.93 | 168.51 | 37.69 | 157.24 | 40.92 | 171.76 |
50 | 38.12 | 158.06 | 39.11 | 168.63 | 37.85 | 156.91 | 40.98 | 170.85 |
Optimal parameter (main structure unpassed)
Mass ratio | Optimal frequency ratio | Optimal damping ratio | ||||
---|---|---|---|---|---|---|
AS | NS | Error | AS | NS | Error | |
0.5% | 0.9902 | 0.9902 | 0.00% | 0.0611 | 0.0611 | 0.00% |
1.5% | 0.9805 | 0.9806 | 0.01% | 0.0858 | 0.0858 | 0.00% |
2.5% | 0.9711 | 0.9711 | 0.00% | 0.1045 | 0.1046 | 0.10% |
3.5% | 0.9613 | 0.9613 | 0.00% | 0.1202 | 0.1202 | 0.00% |
4.5% | 0.9526 | 0.9528 | 0.02% | 0.1337 | 0.1337 | 0.00% |
5.5% | 0.9438 | 0.9437 | -0.01% | 0.1458 | 0.1457 | -0.07% |
6.5% | 0.9344 | 0.9345 | 0.01% | 0.1569 | 0.1569 | 0.00% |
7.5% | 0.9261 | 0.9258 | -0.03% | 0.1668 | 0.1668 | 0.00% |
8.5% | 0.9175 | 0.9174 | -0.01% | 0.1761 | 0.1759 | -0.11% |
9.5% | 0.9093 | 0.9091 | -0.02% | 0.1845 | 0.1846 | 0.05% |