This work is licensed under the Creative Commons Attribution 4.0 International License.
Witek, L., & Zelek, P. (2019). Stress and failure analysis of the connecting rod of diesel engine. Engineering Failure Analysis, 97, 374-382.Search in Google Scholar
Ali, M., & Alshameri, M. A. (2019). An intelligent adjustable spanner for automated engagement with multi-diameter bolts/nuts during tightening/loosening process using vision system and fuzzy logic. The International Journal of Advanced Manufacturing Technology(9/12), 101.Search in Google Scholar
Taghizadeh, H.Chakherlou, T. N.Ghorbani, H.Mohammadpour, A. (2015). Prediction of fatigue life in cold expanded fastener holes subjected to bolt tightening in al alloy 7075-t6 plate. International Journal of Mechanical Sciences, 90(Null).Search in Google Scholar
SC Vlădescu, Fowell, M., Mattsson, L., & Reddyhoff, T. (2019). The effects of laser surface texture applied to internal combustion engine journal bearing shells – an experimental study. Tribology International.Search in Google Scholar
Quan, X., Lv, H., Liu, C., Wang, H., Wu, D., & Chen, P., et al. (2021). An investigation on bolt stress ultrasonic measurement based on acoustic time difference algorithm with adaptive hybrid extended kalman filter. Measurement, 186, 110223-.Search in Google Scholar
Chen, R. (2019). Tightening behavior of bolted joint with non-parallel bearing surface. International Journal of Mechanical Sciences, 153/154.Search in Google Scholar
Xu, ChaoWu, GuannanDu, FeiZhu, WeidongMahdavi, S. H. (2019). A modified time reversal method for guided wave based bolt loosening monitoring in a lap joint. Journal of Nondestructive Evaluation, 38(4).Search in Google Scholar
SJ, JN, Lee, S., & Oh, J. H. (2019). A simple, reusable and low-cost lvdt-based in situ bolt preload monitoring system during fastening for a truck wheel assembly. Metals, 9(3), 336-.Search in Google Scholar
Hu, J., Zhang, K., Cheng, H., & Qi, Z. (2020). Mechanism of bolt pretightening and preload relaxation in composite interference-fit joints under thermal effects. Journal of Composite Materials, 54(30), 002199832094121.Search in Google Scholar
Hosoya, S. (2018). Evaluation of the clamping force of bolted joints using local mode characteristics of a bolt head. Journal of Nondestructive Evaluation, 37(4).Search in Google Scholar
Jiang, K., Liu, Z., Yang, C., Zhang, C., Tian, Y., & Zhang, T. (2022). Effects of the joint surface considering asperity interaction on the bolted joint performance in the bolt tightening process. Tribology International, 167, 107408-.Search in Google Scholar
Abazadeh, B., & Maleki, H. R. (2021). Effect of bolt tightening on the fatigue behavior of glare double shear lap joints. Journal of Composite Materials(21), 55.Search in Google Scholar
Hu, H. (2020). Mechanism of bolt pretightening and preload relaxation in composite interference-fit joints under thermal effects. Journal of Composite Materials, 54(30).Search in Google Scholar
Gao, D., Gong, J., Tian, Z., & Zheng, T. (2020). Research on bolt pre-tightening and relaxation mechanism under transverse load. Advances in Mechanical Engineering, 12(12), 168781402097591.Search in Google Scholar
Guo, Y. N., Zhang, X., Gong, D. W., Zhang, Z., & Yang, J. J. (2019). Novel interactive preference-based multi-objective evolutionary optimization for bolt supporting networks. IEEE Transactions on Evolutionary Computation, PP(99), 1-1.Search in Google Scholar
Coria, I., Abasolo, M., Olaskoaga, I., Etxezarreta, A., & Aguirrebeitia, J. (2017). A new methodology for the optimization of bolt tightening sequences for ring type joints. Ocean Engineering.Search in Google Scholar
